XL6009 Adjustable DC-DC Step Up Boost Converter Display Voltmeter

Xl6009 Dc-dc Step Up Module Adjustable

Feature:
– Length: 60mm
– Width: 35mm
– Height: 13.5mm
– Weight: 24g
– Input Voltage: 3-32V
– Output Voltage: 5-35V
– Output Current: 4A(MAX)
– Output Ripple: 50mV (Higher voltage, larger current and ripple)
– Switching Frequency: 400KHz (LM2577 only 50KHz)
– Operating Temperature: -45 to +85 degree centigrade
– Transfer Efficiency: less than or equal to 94%
– Load Regulation: plus or minus 0.5%
– Voltage Regulation: plus or minus 0.5%
– Wiring Method: Terminal or solder terminal

The self-calibration method of voltmeter:

1. When the voltmeter shows output voltage, long press the right button for 2 seconds, then release, voltmeter and “OUT” LED flash in synchronization. Now the voltmeter enters into output voltage calibration mode. Similarly, when the voltmeter shows input voltage, long press the right button for 2 seconds, then release, voltmeter and “IN” LED flash in synchronization, now the voltmeter enters into input voltage calibration mode.

2. Touch the right button, the voltage rises a unit; Touch the left button, the voltage drops a unit. Due to a unit is less than 0.1 V, so you need to continuously press 5 times to see that the voltmeter changes 0.1 V.

3. After calibration, long press the right button for 2 seconds, then release. Now the voltmeter exits the voltage calibration mode. All the parameters will be saved automatically.
Note: Once calibrate the voltmeter, you can get the accurate voltage value on the whole voltage range.

Package Including:
– 1 pcs XL6009 Module with Digital Display

Optimalkan daya perangkat Anda dengan Konverter Step Up Boost XL6009 DC-DC ini. Modul ini memungkinkan Anda untuk meningkatkan tegangan dengan presisi, dengan output yang dapat diatur sesuai kebutuhan. Dilengkapi dengan display voltmeter, Anda dapat memonitor tegangan dengan mudah. Ideal untuk aplikasi DIY dan pemeliharaan daya yang stabil.